Ridgid K-1500 Sectional Machine / Drain Cleaning Machine
2″ to 8″ (50 mm to 200 mm) Drain and Sewer Lines
- The finest all-around sewer and drain cleaning machine. One man can easily clean the heaviest blockages indoors or out. High-speed cleaning gets the job done faster and better.
- Wheels to the job site sets up fast, cleans up fast.
- Low-profile B frame design will fit most crawl spaces. Loads and unloads from truck easily. Upright A frame features cable carrier storage during transport, ideal for in-house applications.
- Equipped to run, easy to handle, 15 (4.6 m) sections of 1 1/4″ (32 mm) cable to clean 3″ to 8″ (76.2 m to 200 mm) lines to 200 (61 m).
- Easy clutch jaw change-out adapts K-1500 to run 15 (4.6) sections of 7/8″ (22 mm) cable through 2″ to 4″ (50 to 100 mm) lines up to 175 (53 m).
- Equipped with 3/4 HP motor. CSA approved. Approved to UL standards (NRTLC).
Ordering Information
MACHINE OPTIONS – A FRAME
| CATALOG NUMBER |
MODEL NO. |
DESCRIPTION |
Price |
|
| 27592 |
K-1500A |
Machine with A-1 Mitt, A-12 Pin Key, and Rear Guide Hose, Plus: Seven Sections 1 1/4″ (32 mm) (C-11) Cable, Total 105 Feet, Two A-8 Cable Carriers, Nine-Piece 1 1/4″ Tool Set * |
267,900.00 |
| 27612 |
K-1500A |
Machine with A-1 Mitt, A-12 Pin Key, and Rear Guide Hose |
176,950.00 |
MACHINE OPTIONS -B FRAME
| CATALOG NUMBER |
MODEL NO. |
DESCRIPTION |
Price |
|
| 27597 |
K-1500B |
Machine with A-1 Mitt, A-12 Pin Key, and Rear Guide Hose, Plus: Seven Sections 11/4″ (32 m) (C-11) Cable, Total 105′ (32 m), Two A-8 Cable Carriers, Nine-Piece 11/4″ Tool Set |
267,900.00 |
| 27617 |
K-1500B |
Machine with A-1 Mitt, A-12 Pin Key, and Rear Guide Hose |
176,950.00 |
| 27637 |
K-1500B |
Machine with A-1 Mitt, A-12 Pin Key, and Rear Guide Hose, Plus: Seven Sections 11/4″ (32 mm) (C-11) Cable, Total 105′ (32 m), Two A-8 Cable Carriers, Nine-Piece 11/4″ Tool Set |
267,900.00 |
| 33922 |
K-1500B Special Kit |
Machine with A-1 Mitt, A-12 Pin Key, Rear Guide Hose, four Sections 11/4″ (32mm) (C11) Cable, Total 60′ (18m), one A-8 Cable Carrier, T-3 funnel auger, T-50-1 shark tooth cutter and hex key. |
270,000.00 |
Accessories
| CATALOG NUMBER |
MODEL NO. |
DESCRIPTION |
Price |
|
| 62280 |
C-11 |
1 1/4″ (32 mm) x 15′ (4,6 m) Standard All-Purpose Wind. 38″ (10 mm) Pitch. Good for 4″ (110 mm) Traps, 3″ (75 mm) – 8″ (200 mm) Lines |
6,700.00 |
| 62285 |
C-12 |
15′ (4,6 m) Extra-Heavy- Duty Wind. 3/8″ (10 mm) Pitch. Recommended For 4″ (110 mm) – 10″ (250 mm) Long Runs, No 4″ (110 mm) Traps |
8,550.00 |
Reviews
There are no reviews yet.