Spiral Flush Trim Router Bit with 10 Carbide InsertsUnlike brazed or solid carbide flush trim router bits, our Spiral Flush Trim Router Bit with Carbide Insert and Bottom Bearing delivers great cutting performance and a clean finish. It can satisfy your multiple project needs.Findbuytool offers the spiral flush trim router bit with bottom-bearing for your special edge trimming, pattern, or template project requirements. The replaceable carbide inserts make it more cost-effective. Mostly improving your flush trim efficiency andproductivity.FeaturesSize: 12.7mm(shank) x 30mm(dia) x 50mm(cutting length). / 1/2in(shank)x1.18in(dia)x1.96in(cutting length).Industrial quality, made of premium tungsten carbide material.Upgraded, with black oxide coating, better corrosion resistant.With bottom-bearing, ideal for template edge trimming.The spiral groove design can achieve efficient chip evacuation.Producing a clean finish and trim results without chips and burrs.The 10 carbide insert knives provide an efficient and smooth cutting effect.The carbide inserts are replaceable,and more cost-effective than thebrazed-carbiderouter bit.The replaceablecarbide inserts specification:12x12x2.2-4R-0.5The recommendedtorque spec for the insert knife is3Nm.Maximum RPM:8000The bearing is replaceable, you can buy the bearing from here.Note:When cuttingharder or denserwood, please decrease the cutting output and feed slowly.When cutting theplywood, please clean the blade after working.For your safety, the cutting height of the workpiece must be below the cutting height of the router bit, or it may cause wobble or kickback.Always wear safety equipment whenworking.Technical informationShank SizeD (mm)H (mm)Material1/23050Tungsten CarbidePackage Includes1 x Spiral flush trim router bitMachineCNC RouterFixed Base RouterPlunge RouterBench Top Router TableSHIPPING DIAMETERNet Weight:332gPackage Size: 1.57″ x 1.57″ x 5.12″ (40 x 40x 130mm)

Flush Trim Router Bits