The helical cutterhead is designed forDeWalt DW734/DW733/DW733-QS 12.5-inch woodworking thickness planers.Our upgraded helical cutterhead with 54tungsten carbide inserts will leave the least tear outs and sanding after planing compared with helical spiral heads of other brands. The noise would besignificantlyreduced by 50% at least.True shear cut performance:blades are set at an angle, providing a clean shear cut and eliminating tear-outs.More teeth:54 carbide inserts offer 54 cuts per round for superior cutting quality that you do not have to sand and reduce the noise level byOVER 50%.This well-machined helical spiral cutterhead perfectly fits DeWalt DW734 and DW733( including DW733-QS) thicknessers. The tungsten carbide insert knives are madefrom 100%virgin material, so compared with the original planer blades, we provide you:Perfectwood surface finish thanks to the 54 carbide inserts.40 times longer lifetime from our proud carbide insert.Feed faster and more consistently.Same diameter as the original head.No sharpeningand knife change any more.More than50% less noise.The recommended torque for the knives is 6 Newton meters.Please refer to themanualfor guidance on installing the carbide insert knives when replacing them.If you cannot find a cutter head for your machine model,we also provide an optionforacustom cutter head.Technical informationMax Wide of Cut12-1/2 InchCutting DiameterSame as the original headCutting Wings4Insert Knives15x15x2.5mm-30-R150-4R0.5ScrewsM5 x 12Any Option Includes1 X Findbuytool Cutterhead60 X Tungsten Carbide Inserts2 X Pre-assembled FAG Bearings60 X Screws2 X WrenchesApplicationHard Wood/Soft Wood/Artificial Wood

helical cutterhead