Mitutoyo IDC Digimatic Indicators

• Switchable resolutions on models noted below
• Preset, zero-set, inch/metric, counting, GO/NO GO, and f(x)=Ax calculation functions increase versatility
• Function lock
• 7000 Hour battery life
• Absolute encoder ensures all settings are maintained for the life of the battery
• Data hold/Data output button
• Extra large LCD with 0.443″ character height
• Stem diameter: 3/8″
• Thread size: #4-48

Features:

• Similar in size to Series 2 dial indicators
• As compact as standard Series 2 dial indicators
• Large, easy-to-read LCD
• GO/NG judgment can be performed by setting upper and lower tolerance limits. The judgment result (GO/NG) can be displayed in full-size characters.
• The positive/negative count resulting from the spindles up/down movement can be toggled
• Internal calculations using the simple formula of [F(x)=Ax)] are available
• Employing the ABSOLUTE linear encoder, the ID-C always displays the spindle “Absolute Position” from the origin at power-on. Also unlimited response speed eliminates over-speed errors.
• The ID-C indicator face can be rotated 330 to an appropriate angle for easy reading
• With SPC data output

Technical Data:

• Accuracy: Refer to the list of specifications.
• Resolution: 0.01mm, 0.001mm, .0005″/0.01mm, .0001″/0.001mm or .00005″/0.001mm
• Display: LCD
• Length standard: ABSOLUTE electrostatic capacitance type linear encoder
• Max. Response speed: Unlimited
• Measuring force: Refer to the list of specifications
• Battery: SR44 (1 pc.), 938882
• Battery life: Approx. 5,000 hours under normal use
• Dust/Water protection level: IP42 or IP53 (dust-proof type)

Function:

• Origin-set/Preset, Zeroset, GO/NG judgment, Counting direction switching, Power ON/OFF, Data output,inch/mm conversion (on inch/metric models only)
• Alarm: Low voltage, Counting value composition error, Over-flow error, Tolerance limit setting error
• Internal calculations using the simple formula of [F(x)=Ax)] are available

Optional Accessories:

• 905338: SPC cable (40″ / 1m)
• 905409: SPC cable (80″ / 2m)
• 21EZA198: Spindle lifting lever (ISO/JIS type)*
• 21EZA199: Spindle lifting lever (ANSI/AGD type)*
• 21EZA105: Spindle lifting knob (12.7mm/5″ISO/JIS type)**
• 21EZA150: Spindle lifting knob (12.7mm/5″ ANSI/AGD type)**
• 21EZA197: Spindle lifting knob (25.4mm/1″,50.8/2″ models)
• 21EZA200: Spindle lifting knob (50.8mm/2″)
• 540774: Spindle lifting cable (stroke: 1″/25.4mm)
• 02ACA571: Auxiliary spindle spring for 25mm/1″ models***
• 02ACA773: Auxiliary spindle spring for 50mm/2″ models***

* Can be used on 12mm/.5″ models only.
** Not available for low measuring force models.

Specifications:

Item Number 11-660-8 11-661-6 11-662-4 11-663-2 Mitutoyo # 543-392 543-392B 543-396 543-396B Model ID-C112EXB ID-C112EXB ID-C112CEX ID-C112CEX Range 0.5″ / 12.7mm 0.5″ / 12.7mm 0.5″ / 12.7mm 0.5″ / 12.7mm Accuracy 0.0001″ 0.0001″ 0.0001″ 0.0001″ Contact Point Stem dia 3/8″
#4-48 UNF Thread Stem dia 3/8″
#4-48 UNF Thread Stem dia 3/8″
4-48 UNF Thread Stem dia 3/8″
4-48 UNF Thread Measuring Force Less than 1.5N Less than 1.5N Less than 0.4, 0.6, 0.7N Less than 0.4, 0.6, 0.7N Resolution
*Switchable *0.00005″
0.001mm 0.00005″
0.001mm *0.00005″
0.001mm *0.00005″
0.001mm Type ANSI/AGD ANSI/AGD ANSI/AGD ANSI/AGD Remarks – – Low measuring force Low measuring force Item Number 11-664-0 11-665-7 11-666-5 11-667-3 Miutoyo # 543-402 543-402B 543-406 543-406B Model ID-C1012EX ID-C1012EX ID-C1012CEX ID-C1012CEX Range 0.5″ / 12.7mm 0.5″ / 12.7mm 0.5″ / 12.7mm 0.5″ / 12.7mm Accuracy 0.001″ 0.001″ 0.001″ 0.001″ Contact Point Stem dia 3 8 in
4-48 UNF Thread Stem dia 3 8 in
4-48 UNF Thread Stem dia 3 8 in
4-48 UNF Thread Stem dia 3 8 in
4-48 UNF Thread Measuring Force Less than 0.9N Less than 0.9N Less than 0.2, 0.3, 0.4, 0.5N Less than 0.2, 0.3, 0.4, 0.5N Resolution
*Switchable 0.0005″
0.01mm 0.0005″
0.01mm 0.0005″
0.01mm 0.0005″
0.01mm Type ANSI/AGD ANSI/AGD ANSI/AGD ANSI/AGD Remarks – – Low measuring force Low measuring force Item Number 11-668-1 11-669-9 11-670-7 11-671-5 Miutoyo # 543-472B 543-476B 543-492B 543-496B Model ID-C125EXB ID-C1025EXB ID-C150EXB ID-C112CEXB Range 1″ / 25mm 1″ / 25mm 2″ / 50mm 2″ / 50mm Accuracy 0.0001″ 0.001″ 0.0002″ 0.0016″ Contact Point Stem dia 3/8 in
4-48 UNF Thread Stem dia 3/8 in
4-48 UNF Thread Stem dia 3/8 in
4-48 UNF Thread Stem dia 3/8 in
4-48 UNF Thread Measuring Force Less than 1.8N Less than 1.8N Less than 2.3N Less than 2.3N Resolution
*Switchable *0.00005″
0.001mm 0.0005″
0.01mm *0.00005″
0.001mm 0.0005″
0.01mm Type ANSI/AGD ANSI/AGD ANSI/AGD ANSI/AGD Remarks – – – –

Click for a Replacement Battery SR44, Size 357/303