WEN JT630H 10 Amp 6 in. Spiral Benchtop JointerRemember when you had a perfectly square jointer to flatten out your boards and workpieces Maximize precision with the WEN 6 in. Benchtop Jointer. Our spiral cutterhead utilizes 12 staggered HSS blades to provide a perfect finish to hard and soft woods alike, while the powerful 10 Amp motor rotates the cutterhead up to 12,000-times per minute. Adjust the infeed table to remove 0 in. to 1/8 in. of material with each pass, with a reliable depth-of-cut scale for maximum accuracy. The spacious table measures in at 30 in. x 6 in. Bevel the fence up to 45 to create angled cuts along the faces of your boards. The spring-loaded blade guard helps protect against accidental injury, only exposing a limited section of the cutterhead during jointing operation. This package also includes 2 push blocks for safer jointing and, an onboard dust port for minimal cleanup. Compatible with the WEN BP510H Replacement Spiral Blades. And, because its a WEN product, the WEN 6 in. Benchtop Jointer comes backed by a 2-year warranty, a stocked inventory of replacement parts, and a friendly customer help line, all to make sure you remember WEN.Spiral cutterhead system utilizes 12 staggered HSS blades for an ultra fine finishFeatures a spacious 30 in. x 6 in. tableRemove 0 to 1/8 of an inch of material with each passAdjustable 19-3/4 in. x 4-1/4 in. fence bevels up to 45Includes an onboard depth-of-cut scale, 2 push blocks, and a 2-1/2 in. dust portDimensionsProduct Depth (in.)30 inProduct Height (in.)12.5 inProduct Width (in.)17.5 inWork Table Length (in.)30 inWork Table Width (in.)6 in